Mail
SearchbackDescriptionTechnical SpecificationsHole SpecificationsMatching ProductsAccessoriesProcessingPackagingDownloadsStock Check
Power Terminals pitch 5.08 x 7.62 mm Part No. 910-22720/1
Illustration similar
Press-fit
Power
Rugged
- thread M5
- termination length 4.5 mm
Technical Specifications
Basics
| Termination Technology | Press-fit |
|---|---|
| Termination Length | 4.5 mm |
| Operating Temperature Range | -55°C to +125°C |
Material
| Contact Material | Copper alloy |
|---|---|
| Plating | Sn |
Mechanical
| Pitch | 5.08 x 7.62 mm |
|---|
Electrical
| Operational Current | 20° 45A, 70° 30A, 100° 25A |
|---|
Processing
| Thread | M5 |
|---|---|
| Max. Fastening Torque | 1.3 Nm |
Approval / Compliance
| Environment | RoHS compliant |
|---|
Hole Specifications
| Material | imm. Sn printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 2.9 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | imm. Sn plating, max. 1.5 µm |
| F Annular Ring | min. 0.1 mm |
| Material | Ni, Au printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 2.9 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
| F Annular Ring | min. 0.1 mm |
| Material | HAL Sn printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 2.9 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | HAL Sn, 5 - 15 µm |
| F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
