backDescriptionTechnical SpecificationsHole SpecificationsMatching ProductsAccessoriesProcessingPackagingDownloadsStock Check
Power Terminals pitch 5.08 x 10.16 mm Part No. 911-33048
Illustration similar
Press-fit
Power
Rugged
- thread M4
- termination length 5 mm
Technical Specifications
Basics
Termination Technology | Press-fit |
---|---|
Termination Length | 5 mm |
Operating Temperature Range | -55°C to +125°C |
Material
Contact Material | Copper alloy |
---|---|
Plating | Sn |
Mechanical
Pitch | 5.08 x 10.16 mm |
---|
Electrical
Operational Current | 20° 45A, 70° 30A, 100° 25A |
---|
Processing
Thread | M4 |
---|---|
Max. Fastening Torque | 1.3 Nm |
Approval / Compliance
Environment | RoHS compliant |
---|
Hole Specifications
Material | chem. Sn Leiterplatten |
---|---|
Nominal Hole | Ø 1.45 mm |
A PCB Thickness | min 2.9 mm |
B Plated Hole | Ø 1.45 +0.09 / -0.06 mm |
C Drill Hole | 1.60 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | chem. Sn Schicht, max. 1.5 µm |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au Leiterplatten |
---|---|
Nominal Hole | Ø 1.45 mm |
A PCB Thickness | min 2.9 mm |
B Plated Hole | Ø 1.45 +0.09 / -0.06 mm |
C Drill Hole | 1.60 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au Schicht, 0.05 - 0.2 µm Au über 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Material | HAL Sn Leiterplatten |
---|---|
Nominal Hole | Ø 1.45 mm |
A PCB Thickness | min 2.9 mm |
B Plated Hole | Ø 1.45 +0.09 / -0.06 mm |
C Drill Hole | 1.60 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | HAL Sn, 5 - 15 µm |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5